Description

The NRS Pins and Clips keep your oar blades set in the best position for a no-miss, powerful stroke. Heavy-duty components give you years of trouble-free performance.

• Pins and Clips take the worry out of rowing your boat, even in the wildest whitewater.
• This system is very quiet, making it great for fisherman.
• The pins are end-threaded heavy-duty 5/8″ steel, held in place with a nylon-insert lock nut.
• A molded rubber safety bumper on top of the pin protects against injury.
• The clip is rugged powder-coated steel for long-term durability.
• Replaceable PVC bushings that fit on the pin give a snug, quiet fit for the pin/clip pivot point.
• The clip is held on the oar shaft with two heavy-duty stainless steel hose clamps for a no-mar attachment.
• Oar Stirrups, sold separately, are recommended for preventing oars from getting away if the clip pops off the pin in heavy maneuvering.
• The 9″ model has a 3 1/2″ PVC bushing that orients the oar above the oar mount at approximately the same height as an open oarlock.
• The 12″ model has 1″, 2″ and 3 1/2″ bushings, allowing you to adjust the oar height.
• Don’t forget your spare oar clip, and it’s wise to carry a spare pin assembly in your repair kit.

Additional information